Perforated membrane

Product introduction: suitable for epoxy, polyester, vinyl resin system. Features: the company specializes in the production of PE porous isolation membrane, which is made by CO extrusion with appropriate formula, with strong flatness, not easy to wrinkle, labor-saving, as long as one shop, so that the shop operation is more time-saving and heart-saving, resin penetration is even, so that the product effect is better. Vertical and horizontal pulling force and good peeling effect, uniform thickness, uniform hole size, smooth and clean. Product features: it is helpful to remove vacuum auxiliary materials such as demoulding cloth after vacuum process.

关闭
产品咨询
客服热线:400-700-9997

Product introduction: suitable for epoxy, polyester, vinyl resin system.


Features: the company specializes in the production of PE porous isolation membrane, which is made by CO extrusion with appropriate formula, with strong flatness, not easy to wrinkle, labor-saving, as long as one shop, so that the shop operation is more time-saving and heart-saving, resin penetration is even, so that the product effect is better. Vertical and horizontal pulling force and good peeling effect, uniform thickness, uniform hole size, smooth and clean.


Product features: it is helpful to remove vacuum auxiliary materials such as demoulding cloth after vacuum process.


technical parameter

No. index technical requirements

1 material HDPE

2 specification width / mm 1200 ± 20

Thickness / mm 0.03 ± 0.004

Roll length / M 600

Hole diameter / mm 0.5mm; 0.8mm

Hole spacing / mm 8.0 × 8.0 (diamond)

3 color blue

4 tensile strength / MPa ≥ 15

5 elongation at break /% ≥ 100

6. The surface finish is smooth without obvious exposed reinforcement


聚酯脱模布,碳纤维复合材料,真空袋膜


电话咨询
产品展示
QQ客服