Product Center

Lorem Ipsum is simply dummy text

  • Polyurethane fluorine release cloth

    Polyurethane fluorine release cloth

    This product is woven with high-strength PA66 filament as raw material. After strict rinsing and heat setting, the surface is clean and free of pollutants. It has good tear resistance and is stable at high temperatures. It can significantly improve the structural bonding (resin-based composite materials and honeycomb or The shear force of foam or balsa sandwich bonding) is easy for subsequent painting treatment and has good mold release. It is widely used in the composite forming process of aviation, aerospace, shipbuilding and wind power blade manufacturing!

  • 120G green diversion network

    120G green diversion network

    Quality standard: China National Standard (GB) Function: waterproof, three-proof, anti-radiation, anti-static, antibacterial, flame retardant, fireproof, moisture wicking, high strength Composition and content: PA66 nylon Yarn count: 420D Density: 12*2 Width: 150cm Specific use: Special uniforms, industry, suitable for the special high-strength requirements of troops.

  • Special release cloth for glass fiber pultrusion

    Special release cloth for glass fiber pultrusion

    Wujiang Nanfang Chemical Fiber Weaving Factory currently has an advanced five-layer composite blown film machine, casting and perforating combined machine, carbon fiber composite pultrusion equipment and a complete set of textile equipment for warping and weaving heat setting. The products are mainly used in wind power blades, yacht hulls, high-speed trains and aircraft fuselage shells, bridge reinforcement, culverts, building infrastructure, etc.; the market covers Europe, America, Asia and the Middle East, with large state-owned enterprises and well-known foreign companies close co-opperation. Since its development, the company has become one of the earliest and largest vacuum auxiliary material manufacturers in China with the most complete products and the most mature technology. All staff of Wujiang Nanfang Chemical Fiber Weaving Factory sincerely welcome friends, new and old customers at home and abroad to visit and negotiate!

  • 45U-PE perforated isolation membrane

    45U-PE perforated isolation membrane

    This product is woven with high-strength PA66 filament as raw material. After strict rinsing and heat setting, the surface is clean and free of pollutants. It has good tear resistance and is stable at high temperatures. It can significantly improve the structural bonding (resin-based composite materials and honeycomb or The shear force of foam or balsa sandwich bonding) is easy for subsequent painting treatment and has good mold release. It is widely used in composite material forming processes such as aviation, aerospace, shipbuilding and wind power blade manufacturing, and carbon plate manufacturing!

  • Special release cloth for carbon plate pultrusion

    Special release cloth for carbon plate pultrusion

    Vacuum bag film is a kind of copolymer film. It has good extensibility, blocks air, and can be automatically demolded, so it can directly contact the resin. It is mainly used for normal temperature molding of composite materials, vacuum injection and pre-compaction.

  • Epoxy release cloth

    Epoxy release cloth

    Isolation film product introduction: suitable for epoxy, polyester and vinyl resin systems. Features: Our company specializes in the production of PE perforated isolation film. The isolation film is co-extruded with appropriate formula. It has strong flatness, is not easy to crepe, and saves labor. It only needs to be laid once, which makes the paving operation more time-saving Worry-free, the resin penetrates evenly, making the product more intact. Vertical and horizontal tensile force and good peeling effect, uniform thickness, uniform hole size, smooth and clean. Product characteristics: It is helpful to remove the vacuum auxiliary materials such as mold release cloth after the vacuum process.

  • 45U non-porous isolation membrane

    45U non-porous isolation membrane

    Vacuum bag film is a kind of copolymer film. It has high strength, strong elongation, and can directly contact with resin. It is mainly used for normal temperature molding of composite materials, vacuum injection and pre-compaction. It is widely used in aviation, wind energy, shipbuilding industry and tanks. Body molding.

  • VAP unidirectional breathable membrane

    VAP unidirectional breathable membrane

    The unidirectional breathable membrane is a material that can block resin and allow gas to pass through. This product is composed of two parts, a release cloth and a semi-permeable membrane, and is used in the "vacuum introduction of resin" process and the "wet vacuum bag molding process (prepreg or hand lay-up)". The unidirectional air-permeable membrane can continuously extract air and volatiles to prevent the loss of resin in the laminate. In order to make the cured product easy to demold, the semi-permeable membrane surface of the unidirectional air-permeable membrane can be facing the glass fiber laminate, but note that this side cannot be used as a release cloth.

  • One-piece easy to tear diversion net

    One-piece easy to tear diversion net

    PA+PE composite membrane means: this membrane is made of a combination of nylon and polyethylene.

  • 160G sea blue diversion net

    160G sea blue diversion net

    This product is woven with high-strength PA66 filament as raw material. After strict rinsing and heat setting, the surface is clean and free of pollutants. It has good tear resistance and is stable at high temperatures. It can significantly improve the structural bonding (resin-based composite materials and honeycomb or The shear force of foam or balsa sandwich bonding) is easy for subsequent painting treatment and has good mold release. It is widely used in the composite forming process of aviation, aerospace, shipbuilding and wind power blade manufacturing!

About us

Create value for partners!

吴江市南方化纤织造厂

Wujiang Nanfang chemical fiber weaving factory was founded in 2003. It is located in Shengze Town, Wujiang District, Suzhou City, Jiangsu Province, a famous silk town known as "ten thousand pieces of sunrise, clothing and quilt world". Covering an area of 12000 square meters, Wujiang Nanfang chemical fiber weaving factory is a professional composite material manufacturer specializing in the development and research of composite material application technology, product production and sales.

At present, the company has a full set of world advanced warping, weaving and heat setting textile equipment; it mainly produces nylon 66 release cloth, nylon 6 release cloth, polyester release cloth, special release cloth for wind turbine blades, VAP one-way ventilation film, diversion net, integrated diversion net, special release cloth for carbon plate, PA and PE pipe, and vacuum bag film. The products are mainly used in wind turbine blades, yacht hull, high-speed train and aircraft fuselage shell, bridge reinforcement, culvert, building infrastructure, etc.; the factory has become one of the main suppliers of several wind power manufacturers in the world: Vestas, GM, gomesa, Guodian, Zhongfu Lianzhong, Shanghai Glass Research Institute, Sinoma technology, etc. Annual production and sales of various types of release cloth more than 10 million square meters, has become one of the domestic large-scale, complete products, mature technology manufacturers of vacuum composite materials.


News

Always pay attention to the industry trends